Air Duct Cleaning near me in Bloomington MN | Can You Clean Air Ducts Yourself?

Air duct cleaning near me in Bloomington MN

If you’re like me, you’ve been hearing about the benefits of a clean air duct system for years. It keeps your home comfortable and safe, but it can be difficult to know where to start when it comes time to clean your own. Do you need a professional cleaning or can you do it yourself? In this guide, we’ll cover everything from how often you should get your air ducts cleaned to what exactly happens during a professional cleaning. I’ll give tips on how to clean them yourself if that’s what works best for your budget and schedule! Air duct cleaning near me in Bloomington MN

Can you clean air ducts yourself?

Yes, you can clean air ducts yourself.

  • Remove the vent covers and clean them with a vacuum cleaner or a cloth.
  • Clean all registers and grills with a vacuum cleaner or a cloth.
  • Clean the supply ducts using a brush or electric drill with a wire brush attachment on it to remove accumulated dust and debris from inside of the supply ductwork completely before proceeding further into cleaning process while ensuring that no damage is caused during this step in order to prevent major leaks later down the road due to improper maintenance procedures by inexperienced technicians who aren’t aware that there are proper ways for doing things (such as making sure that you’re not damaging any surfaces when using tools like brushes on them).
  • Clean return air vents by removing any debris from where they attach near bottom surface area where ground meets floor level by scraping away loose particles with stiff-bristled brush tool designed specifically for this purpose (or similar type device) until only smooth surfaces remain visible underneath surface coating layer left behind after removing larger objects such as glue stick pieces stuck onto metal surface area which would obstruct normal airflow movement within system if left unchecked over time especially since we’re talking about small pieces so don’t let someone convince otherwise unless they know what they’re talking about because most people don’t know how long something has been there which means there’s no way they could tell whether something was stuck there recently or not without knowing beforehand what kind of materials were used during installation process because some contractors might use different types than others depending on job specifications involved when being hired by different clients so if these details aren’t known ahead then how do we know whether.

If you would like to have assistance with cleaning your air ducts, reach out to your local air duct cleaners. Clean Air Restoration is in Bloomington Minnesota. We can help with your air duct cleaning near me. Contact us today!

How to clean air ducts yourself

  • Use a vacuum cleaner to clean the return air grills.
  • Use a vacuum cleaner to clean the supply ducts.
  • Use a vacuum cleaner to clean registers (the openings in walls, floors and ceilings through which air flows into your home). If you have central air conditioning, inspect the register covers for signs of dust build up—particularly along top edges and corners where dust tends to gather. Remove any accumulated debris with small brush attachment or hand vacuum before cleaning registers with your regular household vacuum cleaner. You may need an extension tube for this job; if so, try using one with soft bristles so as not to damage your HVAC equipment or scratch hardwood floors or wall surfaces around registers.
  • If you have an energy recovery ventilator (ERV), also known as an HRV or fresh-air intake system: check its filter monthly for signs of clogging by measuring airflow through it when operating at high speed; if there’s little resistance then change filters immediately

Cleaning the cold air returns

Cleaning the cold air returns

It is important to clean the cold air returns because this is where dust, debris and other pollutants enter your home. The best way to do this is with a vacuum with a brush attachment or hand duster. If you are using a vacuum with a brush attachment, make sure it has soft bristles so as not to damage the metal grates in your home. It is also important that you use a soft cloth or duster when cleaning these surfaces because they may be delicate or easily scratched by harsh materials like steel wool pads or wire brushes.

When using either method, begin by vacuuming up all loose dirt and dust from around the base of each return grill so that air can flow freely through them during operation (Figure 2). Next take note of what type of material covers your attic access panel: aluminum foil, plastic sheeting or some combination thereof (Figure 3). If there are any gaps between these materials and their respective parts around them then seal them up with duct tape first before proceeding further into cleaning mode!

Cleaning the registers and grills

If you have registers and grill vents, use a vacuum hose to clean them. First, remove the register cover and brush out any debris with a soft brush. Then moisten a cloth with warm water and wipe down both sides of the register until it’s clean. Finally, let it dry before replacing the register cover.

Cleaning the supply ducts Air duct cleaning near me in Bloomington MN

You can clean the supply ducts by using a vacuum. First, remove any debris that has accumulated within the ducts. Use a brush attachment to remove dust and dirt. Make sure to clean the filter on your vacuum so it doesn’t become blocked in the future.

Remember to clean any vents in the room where your air conditioning system is located as well!

Cleaning the return air ducts Air duct cleaning near me in Bloomington MN

When cleaning the return air ducts, use a brush to remove any cobwebs. If there are any loose debris stuck in the ducts, remove it with your hands or a vacuum. Cleaning these areas will get rid of any dust and dirt that has accumulated over time.

If you have mold or mildew in your home, then you will want to hire a professional cleaning service for this job because it can be dangerous for someone who does not know what they are doing to attempt it themselves.

The difference between cleaning and restoration

A professional air duct cleaning company will perform both cleaning and restoration. Cleaning is the removal of dirt, debris and contaminants from your air ducts to make them safe for use. Restoration, on the other hand, refers to repairs or restoration of property damaged by fire, water, mold or other natural or man-made disasters.

Schedule professional a professional cleaning today.

If you live in an older home, chances are good that the air ducts have never been cleaned. If this is the case, a professional cleaning is highly recommended. When you hire a professional to clean your ducts, they will remove all of the accumulated debris and dirt from inside each duct as well as sanitize them with special chemicals that kill any bacteria or mold spores that may be present in your system.

Additionally, if any insulation needs to be replaced in order for proper airflow from your furnace or air conditioner then this cost would be included in the price of their services as well.

Conclusion

It’s a good idea to clean your air ducts at least once a year. Remember, if you have allergies or asthma, it is even more important that you clean your air duct system often. You can do this by following the steps above or hiring a professional cleaning company like us! At Clean Air Restoration, we’d be happy to help you with any of your needs. Reach out to us for air duct cleaning near me in Bloomington Minnesota. Our services include: Air Duct Cleaning, Dryer Vent Cleaning, Clean Air Continued Care, Water Damage Restoration, Mold Remediation, Fire Damage Reconstruction, Sewage Removal Services, and More!

Air duct cleaning near me in Bloomington MN

Air duct cleaning near me in Bloomington MN

Air duct cleaning near me in Bloomington MN

Air duct cleaning near me in Bloomington MN